Specification Sheet

In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Model ENOBM8K
* Patent #4,481,971
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(2/06) 12-48
elkayusa.com
No Lead SwirlFlo
®
Sensor Operated
Hands-Free
®
Wall Mount Water Cooler
Barrier-Free Access
Model ENOBM8K
®
SPECIFICATIONS
GENERAL
Single station barrier-free stainless steel water cooler has
recessed in-the-wall refrigeration system and stainless steel
grill. Stainless steel tubular support arm incorporates unique
recess to be integrated with basin. All stainless steel
polished to lustrous satin finish with high shined outer edge.
Fountain has contoured basin to minimize splashing and
Flexi-Guard
®
safety bubblers. Sensor-operated cooler has
unique Hands-Free
®
operation and automatic flow regulator
provides constant stream from 20 to 105 psi.
Energy efficient refrigeration system utilizes a combination
tank continuous-tube type evaporator, refrigerant drier, and
capillary tube.
THIS WATER COOLER COMPLIES WITH THE REQUIRE-
MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT)
WHEN PROPERLY INSTALLED.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986
AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Water Coolers are manufactured with a waterway sys-
tem utilizing copper components and completely lead-free
material. These waterways have no lead because all lead
materials, such as leaded brass, have been removed. All
joints are brazed using silver solder only. No lead solder is
permitted. A strainer with an easily cleanable screen is pro-
vided to allow trapping and convenient removal of waterborne
particulate of 140 microns and larger prior to their entry into
the water cooler.
This water cooler is certified to NSF/ANSI 61.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
115V, 60 Hz or 230V, 50 Hz (International Model) single phase.
Sealed-in lifetime oil supply.
Condenser: Fan cooled, copper tube with aluminum fins. Fan
motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Self cleansing. Tube
portion is continuous coil of copper tubing. Tank is stainless
steel. Fully insulated with EPS foam which meets Underwriters
Laboratories Inc. requirements for self extinguishing material.
Temperature Control: Enclosed adjustable thermostat is fac-
tory preset. Requires no adjustment other than for altitude
requirements.
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
performance.
CONSTRUCTION
Electronic Sensor Hands-Free
®
Operation: On-off solenoid
valve is actuated by an infrared light beam sensor. When light
beam is interrupted by subject in front of cooler desiring a
drink, the sensor actuates the solenoid valve which then
opens to allow water flow. No physical contact with cooler is
required. A built in time delay is provided to prevent actuation
by persons moving past cooler. There is a maximum running
time of 30 seconds to prevent malicious damage to the
cooler or water damage if sensor vision is blocked. Unit auto-
matically resets when blockage is removed. Sensor range is
adjustable.
Fountain Body: #18 gauge, type 304 nickel bearing stainless
steel polished to a lustrous satin finish with high shined outer
edge. Contoured basin offers large strike area to minimize
splashing. #16 gauge, type 304 tubular support arm incorpo-
rates unique recess to accept basin.
Exclusive Flexi-Guard
®
Safety Bubbler*: Innovative design
utilizes an infused anti-microbial pliable polyester elastomer
to prevent accidental mouth injuries. Flexes on impact,
then returns to original position. Strong. Abrasion-resistant.
Anti-sweat. Optional Vandal-Resistant Bubbler available at
extra cost. Heavy-duty, one-piece construction, chrome plated
brass. Bubbler meets UL requirements and all sanitary codes
and are keyed in location to prevent rotation.
Front Panel Grill: Made of type 304 stainless steel, polished
to a uniform Elkay satin finish. Removable louvered ventilat-
ing grill encloses refrigeration unit and plumbing.
Wall Mounting Frame: MF100 frame furnished with each
unit. Frame allows flush mounting to finished wall.
5 YEAR LIMITED WARRANTY on the refrigeration system of
the unit. Electrical components and water system are war-
ranted for 12 months from date of installation. Sample
Certificate available on request.
Elkay Pressure-Type Water Coolers are designed to operate
on 20 psi to 105 psi supply line pressure. If inlet pressure is
above 105 psi, a pressure regulator must be installed in the
supply line. Any damage caused by reason of connecting this
product to supply line pressures lower than 20 psi or higher
than 105 psi is not covered by the warranty.
STANDARDS
CAPACITIES CHART
**Based on 80°F inlet water temperature.
Rated watts shown are based on operational (run) time, in compliance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.
*GPH of 50°F Drinking Water
Full Glass Ship.
Model Base
Room Temperature °F
Rated Load Filler Pre- Wt.
Number Rate 70°F 80°F 90°F Watts Amps Option Cooler Lbs.
ENOBM8K 7.5 8.6 8.1 7.5 370 4.0 No No 98
Elkay Electric Air Cooled Water Coolers meet the
requirements of NSF/ANSI 61. Unit complies with
A.R.I. Standard 1010.