Specification Sheet

Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2003 Elkay
13-2E (Rev. 7/03)
No Lead Remote Chiller
Air Cooled
Model ER2
®
ROUGH-IN DIMENSIONS
Drain Plug: This chiller is provided with a plastic drain plug which
incorporates an o-ring seal. This fitting is designed for potable water
applications and should be replaced with a suitable fitting if chiller is used
with more aggressive liquids.
It is important to insure proper ventilation. Allow a minimum
clearance of 6 inches (152mm) in front and 3 inches (76mm) in
the rear of the unit. If unit is to be installed in an enclosure, allow
the following clearances around unit: 1 inch (25mm) each side,
3 inches (76mm) in the rear, 3 inches (76mm) above. Wall grill,
EG1 or EG2 may be used with this unit.
NOTE:
TOP VIEW
13-1/2"
(343 mm)
1-3/4"
(44mm)
15-3/4"
(400mm)
1-1/4"
(31mm)
DRAIN
SIDE VIEW
FRONT VIEW
10-1/2"
(267mm)
ADJ
COLD CONTROL
ELECTRICAL
3-3/8"
(86mm)
1-1/4" (32mm)
1/4" O.D. TUBE INLET
3"
(76mm)
7/8"
(22mm)
2-7/8"
(73mm)
1/4" O.D. TUBE
COLD WATER OUTLET
C
O
L
D
E
R