Specification

10"
(254mm)
2-1/4"
(57mm) R
4"
(102mm)
20"
(508mm)
15-3/4"
(400mm)
20"
(508mm)
14"
(316mm)
3"
(76mm) R
1
4"
(102mm)
2
4"
(102mm)
MR2
4"
(102mm)
4"
(102mm)
3
4"
(102mm)
4"
(102mm)
4"
(102mm)
OS4
HOLE DRILLING
CONFIGURATIONS
G
ENERAL
Good quality sink formed of #20 (1.0mm) gauge, type 304 (18-8)
nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 10" (254mm).
C
oved Corners: 3" (76mm) vertical radius, 2-1/4" (57mm) hori-
z
ontal radius.
Finish: Exposed surfaces are polished to a bright satin finish.
Underside: Fully undercoated to dampen sound and reduce
condensation.
OTHER
Drain Opening: 3-1/2" (89mm).
Note: Unless otherwise specified, sink is furnished with 3 faucet
holes as shown.
Installation hardware for 3/4" (19mm) thick countertop included.
This sink complies with ASME A112.19.3-08/CSA B45.4-08.
OPTIONAL ACCESSORIES
Bottom Grid: LKWBG1415SS.
Cutting Board: CB1516.
Drain: LK99.
Installation hardware for thicker countertops: LK363 (up to
1-1/2" [38mm] thick; LK463 (up to 2-1/2" [66mm] thick).
Rinsing Baskets: LKWRB1316SS, LKWERBSS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2008 Elkay
(Rev. 11/08) 1-167B
elkayusa.com
M
odel ESE2020103
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Gourmet
™
Single Bowl Sink
Model ESE202010
SPECIFICATIONS
Cutout in
Countertop
No. of
Inside 1
1
/2" (38mm)
1
1
/2" (38mm) Minimum
Model
Overall Each Bowl Radius Corners
Dia. Faucet Cabinet
Number LWLWDLWHoles Size
ESE202010 20 20 15
3
/4 14 10 19
3
/8 19
3
/8 1, 2, MR2, 24
(508mm) (508mm) (400mm) (356mm) (254mm) (492mm) (492mm) 3 or OS4 (610mm)
SINK DIMENSIONS*
* Length is left to right. Width is front to back.