Specification Sheet

Service Sink, Wall Mounted
With Drainboard and Sensor Faucet
AC / Battery, Models ESS4924RSACC,
ESS4924RSACMC and ESS4924RSACTMC ®
SPECIFICATIONS
GENERAL
ESS4924R #14 gauge, type 304 (18-8) stainless steel service
sink with right hand 30" (762mm) drainboard. 1/4" (6mm) radius
vertical and horizontal coved corners. 1-1/2" (38mm) rolled rim.
Full length backsplash with 45° sloped top. Exposed surfaces
are hand blended to a uniform satin luster finish. Furnished with
wall hanger and stainless steel support brackets. Carries NSF
International Certification.
(CHECK MODEL SPECIFIED)
MIXING
MODEL FAUCET DRAIN VALVE
ESS4924RSACC LKB722C LK18B NONE
ESS4924RSACMC LKB722C LK18B LK724
ESS4924RSACTMC LKB722C LK18B LK723
LKB722C Sensor-operated, non-mixing (tempered water),
backsplash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sen-
sor range. When hands are removed, the water stops automat-
ically based on shut off delay settings. The sensor then resets
and is ready for the next user. Chrome-plated solid brass body
construction with 2.0gpm laminar flow control on spout end.
Includes water-resistant sensor control module and power cables.
Features dual power options: AC plug-in and battery holder with
four AA batteries. Slow-closing piston operated solenoid valve,
in-line filter with clean-out trap and flexible supply hose.
Control circuit is solid state, has adjustable sensor range of 7/8"
(22mm) to 6-3/4" (171mm), shut-off delay preset to 1 second and
field adjustable to 2 seconds (to prevent sink overflow).
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 4/10) 3-39B
www.elkay.com
Model ESS4924RSACC
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
28-1/2"
(724mm)
3"
(76mm)
15"
(381mm)
1-1/2"
(38mm)
1" (25mm)
(25mm)
36"
(914mm)
TO
FLOOR
10"
(254mm)
12"
(304mm)
H
I
3-1/2"
(89mm)
7/16" (11mm)
DIA. HOLE
7/16" (11mm) x
3/4" (19mm) SLOT
ST
BRACKETS
1/4" R
(6mm)
1/2" (12mm)
TURNDOWN
A
3-1/2" (89mm)
DIA. HOLE
2"
(51mm)
D
(38mm)
RIM
(38mm)
RIM
B
C G
E
1/4" R
(6mm)
F
FLOOR LINE
1 HOLE
Model
A B C D E F G H I
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
ESS4924R 49
1
/
2 1257 24 610 18 457 20
1
/
2 521 10
1
/
2 267 12
1
/
4 311 30 762 8 203 10 254
DIMENSIONS