Instruction Manual
Page 62000000557 (Rev. B - 06/22)
LZO8WSN_2A
B CA
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
OPERATION OF QUICK CONNECT FITTINGS
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
TUBE IS SECURED
A B C
2. Bubbler
3. Ventilation
4.
5.
6.
Service: Adjustments
1. Temperature Control
2.
3. Stream Regulator:
regulator part number.
4.
5. Cooler Sensor Range Adjustment:
- Using a small tip screwdriver, locate range adjustment screw through the small hole between the sensor lenses. Turn this screw clockwise
to increase range and counterclockwise to decrease range.
6. Sensor Control:
- Ensure there are no obstructions within a 40 inch (1016mm) radius in front of cooler.
- Check wire connections at the solenoid valve and sensor.
Service: Inspection/Cleaning
•
•
1. Cleaning
Service
•
• Protective gloves
DANGER
•
•
•
CAUTION
• To prevent scratching the basin, place a towel or soft cloth over the entire basin when working above it.
• Do not puncture tubing.
•
•
• Place in a well ventilated area to prevent accumulation of refrigerant.
•
CAUTION
•
•
CAUTION
CAUTION