Specification Sheet

ManualsBrandsElkay ManualsCommercial PlumbingEZH20 36-1/4" Wall Mounted Bi-Level Station Hands Free Bottle Filler Combo - Cooler Operated

SPEC14-72 (04/2015)

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. EZSTL8WS

shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F

inlet water. EZSTLDDWS shall deliver non-chilled drinking water. Cooler

units shall have pushbar activation. Bottle lling unit shall include an

electronic sensor for touchless activation with auto 20-second shut-off

timer. Shall include Green Ticker™ displaying count of plastic bottles

saved from waste. Bottle ller shall provide 1.1-1.5 gpm ow rate with

laminar ow to minimize splashing. Shall include integrated silver ion

anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit

shall be lead-free design which is certied to NSF/ANSI 61 and 372 and

meets Federal and State low-lead requirements. Unit shall be certied to

UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Easy-Touch front and side pushbar controls (Cooler)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (EZSTL8WS); 1.5 gpm (EZSTLDDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Available with Flexi-Guard

bubbler or Vandal-resistant

bubbler

(

includes “VR” code in model no. see chart below)

• Versatile cooler design allows units to be installed either left-hand high and

right-hand low or left-low and right high

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless

Steel

COOLING SYSTEM (Models EZSTL8WS & EZSTL8WSVR only)

• Compressor: hermetically-sealed, reciprocating type, single phase.

Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous

copper tubing with stainless steel tank. Fully insulated with EPS foam

which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately

calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat

is factory preset. Requires no adjustment other than for altitude

requirements.

CAPACITIES CHART

Model

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

Rated

Watts

Approx.

Ship Wt.

UL399

and CAN/

CSA 22.2

No. 120

Certied

ADA

COMPLIANT

ANSI/NSF

61 and 372

Certied

GreenSpec

Listed

EZSTL8WS(VR)*K 115V / 60Hz 8.0 GPH 5.0 370 89 lbs

• • • •

EZSTL8WS(VR)*2K 220V / 50Hz 6.7 GPH 2.5 370 89 lbs

++ • • •

EZSTL8WS(VR)*3K 220V / 60Hz 8.0 GPH 2.5 370 89 lbs

++ • • •

EZSTLDDWS(VR)*K 115V/60 Hz

–

1.0 15 63 lbs

• • • •

EZSTLDDWS(VR)*2K 220V/50Hz

–

0.5 15 63 lbs

++ • • •

EZSTLDDWS(VR)*3K 220V/60Hz

–

0.5 15 63 lbs

++ • • •

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.

**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

++Complies; not third party certied.

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides structural

integrity

• Stainless steel bottle ller wrapper with ABS plastic alcove

• Cooler cabinet available as Light Gray Granite Vinyl Clad Steel

or Stainless Steel (additional cost) construction

• Flexi-Guard

Safety Bubbler (option) utilizes an infused

anti-microbial pliable polyester elastomer to prevent accidental

mouth injuries. Flexes on impact.

• Vandal-resistant

bubbler (option) is one-piece heavy-duty

construction

Warranty: 5 year limited warranty on the unit’s refrigeration system.

Electrical components and water system are warranted for 12

months from date of installation or 18 months from factory shipment,

whichever date falls rst.

SPECIFICATIONS

EZH2O

Bottle Filling Station

Versatile Bi-Level EZ Cooler

Models EZSTL8WS & EZSTLDDWS

This specication describes an Elkay product with design, quality and functional

benets to the user. When making a comparison of other producer’s offerings,

be certain these features are not overlooked.

2222 Camden Court

Oak Brook, IL 60523

630-572-3192

elkay.com

In keeping with our policy of continuing product improvement,

Elkay reserves the right to change specication without notice.

Please visit elkay.com for the most current version.

*Versatile cooler conguration

as shipped

*Versatile cooler conguration

alternate installation

RATED FOR INDOOR USE ONLY

Summary of content (3 pages)

PAGE 1
EZH2O® Bottle Filling Station Versatile Bi-Level EZ Cooler Models EZSTL8WS & EZSTLDDWS SPECIFICATIONS RATED FOR INDOOR USE ONLY PRODUCT SPECIFICATION Unit shall include electric water cooler with bottle filling station. EZSTL8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. EZSTLDDWS shall deliver non-chilled drinking water. Cooler units shall have pushbar activation.
PAGE 2
EZH2O® Bottle Filling Station Versatile Bi-Level EZ Cooler Models EZSTL8WS & EZSTLDDWS IMPORTANT! INSTALLER PLEASE NOTE: These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building but may also occur away from the building.
PAGE 3
EZH2O® Bottle Filling Station Versatile Bi-Level EZ Cooler Models EZSTL8WS & EZSTLDDWS ROUGH-IN DIMENSIONS RATED FOR INDOOR USE ONLY NOTICE This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non- metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system.