Dimensions Guide

GENERAL
Sink is formed of #22 (.8mm) gauge, 300 series, nickel-bearing
stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: 5-3/8" (137mm).
Coved Corners: 3" (76mm) vertical and 2-1/4" (57mm) hori-
zontal radius.
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2" (89mm).
Suffix L (left) or R (right) denotes location of the drain.
SPECIFICATIONS
U-Channel Type Mounting System
U-Channel Type Mounting System
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Model GE12521R4
Model GE233214
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
These Sinks comply with ASME A112.19.3/ CSA B45.4
Dayton
®
A.D.A. Compliant Sink
Models GE12521, GE12521L,
GE12521R, GE23321 and GE23322
3
1
4
5
2
Hole Drilling Configurations
1-1/2
" (38mm) Diameter Faucet Holes on 4 " (102mm) Centers
3
1
4
5
2
Hole Drilling Configurations
1-1/2
" (38mm) Diameter Faucet Holes on 4 " (102mm) Centers
Model GE125214
Model GE12521L4
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
MR2
MR2
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 11/14)
02-41
elkay.com