Specification

GENERAL
Sink is formed of #22 (.8mm) gauge, 300 series, nickel-bearing
stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: 5-3/8" (137mm).
Coved Corners: 3" (76mm) vertical and 2-1/4" (57mm) hori-
zontal radius.
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2" (89mm).
Suffix L (left) or R (right) denotes location of the drain.
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
These sinks comply with ASME A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
require ments of the Uniform Plumbing Code.
Model GE12521L4
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2009 Elkay
(Rev. 5/09)- 2-42F
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
A.D.A. Compliant Sink
Models GE12521, GE12521L,
GE12521R and GE23321
S P ECI FIC ATI O NS
Model GE125214
Model GE12521L4
Model GE12521R4
Model GE233213
Model GE233214
Model GE125213
Model GE12521L3
Model GE12521R3
4"
(102mm)
4"
(102mm)
HOLE DRILLING CONFIGURATION
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
U-Channel Type Mounting System
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Model GE12521R4
Model GE233214
These sinks are listed with the Canadian Standards
Association.
These sinks are designed for ADA compliance.
Model GE12521