Specification Sheet

GENERAL
Sink is formed of #22 (.8mm) gauge, 300 series, nickel-bearing
stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: 5-3/8" (137mm).
Coved Corners: 3" (76mm) vertical and 2-1/4" (57mm) hori-
zontal radius.
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2" (89mm).
Suffix L (left) or R (right) denotes location of the drain.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Model GE12522L4
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2012 Elkay
(Rev. 3/12) 2-42G
elkayusa.com
Dayton
®
A.D.A. Compliant Sink
Models GE12522, GE12522L,
And GE12522R
SPECIFICATIONS
HOLE DRILLING CONFIGURATION
U-Channel Type Mounting System
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Model GE12522R4
Model GE12522
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visti elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these featrues are not
overlooked.
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
5
4
3
MR2
2
4"
(102mm)
1
1-1/2” (38mm) Diameter Faucet Holes on 4” (102mm) Centers
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.