Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG2816SS
Cutting Boards: CB1713, CBS1316 (ELUH models only)
Rinsing Baskets: LKWRB2816SS, LKWERBSS
Utensil Caddy for Rinsing Baskets: LKWUCSS
Model ELUH2816PD
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
1-407
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This sp ecification describes an Elkay product with design, q uality and functional benefits to the
user. When making a comparison of other produc ers
’ off
erings, be certain these featur es are not
overlooked.
®
SPECIFICATIONS
(Rev. 07/11)
Mounting Hardware: LKUCLIP8 (2 packages required)
Finish: Exposed surfaces are hand blended to a Lustrous (Highlighted)
Satin finish.
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELU2816PDBG ELU2816PD LKWOBG2816SS 1 LKPD1 1
ELU281610PDBG ELU281610PD LKWOBG2816SS 1 LKPD1 1
ELUH2816PDBG ELUH2816PD LKWOBG2816SS 1 LKPD1 1
ELUH281610PDBG ELUH281610PD LKWOBG2816SS 1 LKPD1 1
Model ELU2816PD and ELUH2816PD Series
with Perfect Drain
TM
SINKS ARE
MADE IN THE USA
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Bowl Depth: See chart on next page.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet Undermount Sink