Installation Instructions

1
321
Remove the hand shower from its seat. Unscrew it from its cover paying attention not to
lose the rubber gasket (A).
Separate the hand shower cover from the hose.
54
Unscrew the bushing connected to the end of the
hose (B) paying attention not to loose the rubber
gasket (C).
You can now totally remove the hose from the faucet
body and replace it with a new hose.
Reassemble the hand shower assembly by following
the instructions in reverse order.
REPLACEMENT OF THE HAND SHOWER
2
Before removing the aerator make sure that the faucet is turned off.
Unscrew the aerator using the aerator installtion key (E) included with the faucet.
If the aerator is clogged just rinse it with running water. Do not use detergents.
Reassemble the aerator by following the instructions in reverse order.
AERATOR CLEANING / REPLACING
1/2”
[13 mm]
5/16”
[8 mm]
E
A
B
C