Spec Sheet

GENERAL
Sink is formed of #23 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: 6"(K12521 series), 6-1/16” (K(J)12522) series.
Faucet Deck: Raised
Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius.
Bowl Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2"(89mm)
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Model K125224
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 2-23H
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Kingsford
®
Single Bowl Sink
Models K12521, K12522 and KJ12522 Series
SPECIFICATIONS
Installation Hardware: Included for 3/4” (19mm) countertop.
Underside: Undercoated on bottom of bowl.
Rim Height: 3/16” (5mm)
SINKS ARE
MADE IN THE USA
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
OPTIONAL ACCESSORIES
SINK PACKAGE
FAUCET FEATURES
Bottom Grid: GBG2115SS
Cutting Board: CB1516
Drain: LK35, D1125
Chrome finished, single-lever kitchen faucet with side spray.
Flexible supply tubes with 1/2" (13mm) male IPS adapters.
Faucet complies with: ADA, ASME A112.18.1/CSA B125.1, cUPC, CA AB1953
Faucet flow rate: 2.2 GPM/8.3 L/min at 60 P.S.I.G.
K125224DF includes: (1) Sink - K125224, (1) Faucet - LK2478CR,
and (1) Drain.
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.