Specification

E is Bowl Depth
GENERAL
Sink is formed of #23 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: 6"(K12521 series), 6-1/16” (K(J)12522) series.
Faucet Deck: Raised
Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius.
Bowl Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2"(89mm)
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Model K125224
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 6/10) 2-23F
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Kingsford
®
Single Bowl Sink
Models K12521, K12522 and KJ12522 Series
SPECIFICATIONS
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
U-Channel J-Channel Minimum
Model Model
Overall Inside Bowl
Cabinet
Number Number A B C D E L W
L W L W D
Size
K12521 —
3 or 4
K12522 KJ12522
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
U-Channel Type Mounting System
J-Channel Type Mounting System
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Underside: Undercoated on bottom of bowls to reduce
condensation and dampen sound.
Rim Height: 3/16” (5mm)
25
(635mm)
25
(635mm)
22
(559mm)
21-1/4
(540mm)
21
(533mm)
21
(533mm)
15-3/4
(533mm)
15-3/4
(533mm)
6
(152mm)
6
(152mm)
24-3/8
(619mm)
20-5/8
(524mm)
30
(762mm)
30
(762mm)
24-3/8
(619mm)
21-3/8
(543mm)
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)
No. of 1-1/2”
(38mm) Dia.
Faucet Holes
4"(102mm)
Center
2†, 3, or 4
† 2 hole only available for model K12522.
SINKS ARE
MADE IN THE USA
Hole Drilling Configurations
1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center
2
4"
3
4" 4"
4
4" 4" 4"
A
C
D
B