Spec Sheet

SINKS ARE
MADE IN THE USA
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 2-19I
elkayusa.com
Model K233224
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This sp ecification describes an Elkay product with d esign, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
GENERAL
Sink is formed of #23 gauge, type 301 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: 6-1/16" (156mm)
Faucet Deck: Raised
Coved Corners: 4"(102mm) vertical and 3-1/4"(83mm) horizontal
Bowl Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2" (89mm).
Note: Unless otherwise specified, sink is furnished with 4
faucet
holes
as shown.
Kingsford
®
Double Bowl Sink
Models K23321, K23322 and KJ23322Series
SPECIFICATIONS
Installation Hardware: Included for 3/4” (19mm) countertop.
Rim Heights: 3/16” (5mm)
radius.
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1415SS
Drain: LK35, D1125
SINK PACKAGE
FAUCET FEATURES
Chrome finished, single-lever kitchen faucet with side spray.
Flexible supply tubes with 1/2" (13mm) male IPS adapters.
Faucet complies with: ADA, ASME A112.18.1/CSA B125.1, cUPC, CA AB1953
Faucet flow rate: 2.2 GPM/8.3 L/min at 60 P.S.I.G.
K233224DF includes: (1) Sink - K233224, (1) Faucet - LK2478CR,
and (2) Drains.
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.