Installation Sheet

15 Elkay Manufacturing Company
[phone]
1000005232 (
Rev. B - 05/19) Built-in Filtered Water Dispenser
2. Shut off the water supply using the shut-off valve.
Turn water shut-off valve handle to the OFF position
(clockwise). The handle will be facing up when closed.
Note: The filter head contains an automatic shut-off
valve that stops the flow of water, in case filter is
inadvertently removed without shutting OFF the
water supply.
3. Activate the water dispenser using a water bottle to
relieve pressure in the water line.
4. Shut OFF power to the unit at the circuit breaker.
5. Place a towel inside the lter box, under the lter, to
absorb any water that leaks out of the lter when it is
removed.
6. Twist the lter counterclockwise until it is disengaged.
Remove the lter and quickly hold it upright.
7. Drain the lter before disposing of it in the trash. The
lter can be discarded along with the everyday trash.
8. Remove and discard the protective cap from the new
lter cartridge.
9. Mark the current date on the label of the new lter
cartridge in the space provided.
10. Attach the lter cartridge by rmly inserting it onto
the lter head and twisting it clockwise until it is
completely seated. The label must be facing outward
to be correctly installed.
11. Restore power to the unit at the circuit breaker.