Instructions / Assembly

[phone] Elkay Manufacturing Company
1000005449 (Rev. E - 04/23)
Page 9
C
B
A
D
Ground
Recommended Dimensions
A - Unit width opening should be 14-1/2" (368 mm) wide
B - Unit height opening with lter box should be
26-1/2" (673 mm) high
C - Suggested unit height from the oor is
56-3/4" (1441 mm)
D - Optional cut from bottom of water dispenser to oor
for plumbing and electrical access
4.3.2 Water Dispenser without Filter Box
Dimension A is a minimum requirement.
A
Water Dispenser
A) 3-7/8" (97 mm) deep
C
B
A
Ground
D
Recommended Dimensions
A - Unit width opening should be 14-1/2" (368 mm) wide
B - Unit height opening should be 19-7/8" (505 mm) high
C - Suggested unit height from the oor is
56-3/4" (1441 mm)
D - Optional cut from bottom of water dispenser to oor
for plumbing and electrical access
4.3.3 Plumbing and Electrical Key
1
2
3
Ground
Plumbing and Electrical Key
1) P-trap 2) 3/8" exible water tubing (3) Electrical box
Note: Always consult local plumbing codes prior to installation.
Note Item 1: If the p-trap is sealed within the wall, under
the water dispenser, all the plumbing joints
must be glued. The glue must be
appropriate for the PVC pipe utilized. If the
p-trap uses threaded components, they
must be easily accessible.
Note Item 2: According to most electrical codes, the
electrical box cannot be sealed inside a wall
cavity with no access. If the electrical
connection is placed under the unit, a user
supplied removable wall cover will be
required to access the junction box.