How to Guide

GENERAL
Highest quality sink formed of #18 gauge, type 304 (18-8) nickel
bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 7-7/8" (left and right bowls), 6-1/8" (center bowl).
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of sink.
Finish: Exposed surfaces are polished to a lustrous highlighted
satin finish.
Underside: Fully protected by heavy duty Sound Guard
®
under-
coating to dampen sound and prevent condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 6
faucet holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: Small Bowl: LKWRB1209SS, LKWUCSS;
Large Bowl: LKWRB1418SS, LKWERBSS, LKWUCSS.
Cutting Boards: CB912, CBR1418 or CBS1418.
Model LCR(Q)43226
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
3-1/2"
4"
5"
5"
5"
5"
4"
2-1/2"
14"14" 9-1/4"
43"
22"
18"
12"
1-3/4" R
6-1/8"
7-7/8"
1-3/4" R
Model LCR43226 Illustrated
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(Rev. 8/06) 1-134C
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Lustertone
®
Triple Bowl Sink
Models LCR4322 and LCRQ4322
®
SPECIFICATIONS
Cutout in
No. of
Inside Inside Inside Countertop
1
1
/2" Dia.
U-Channel Quick-Clip
®
Left Center Right (1
1
/2" Radius
Faucet Minimum
Model Model
Overall Bowl Bowl Bowl Corners)
Holes Cabinet
Number Number L W L W D L W D L W D L W 4" Centers Size
LCR4322 LCRQ4322 43 22 14 18 7
7
/8 9
1
/4 12 6
1
/8 14 18 7
7
/8 42
3
/8 21
3
/8 3, 4, 6 48
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
These sinks comply with ANSI Standard A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
4"
3
4"
4"
4
4"
4"
6
4"
HOLE DRILLING CONFIGURATIONS
3-1/2"
3-1/2"