Installation Instructions

WARNING: Please carefully read and properly follow the instructions for installation found in this manual.

Screw bolts to the escutcheon. Insert escutcheon

assembly through the base plate and the holes of

the sink.

STEPS:

Retract pull-down hose (1) up through faucet body,

until the pull-down hose fitting is flush with the bottom

of shank (2). Do not pull hose fitting past the shank.

Insert faucet body through the hole in escutcheon.

From underneath sink, hand tighten mounting nuts

(3). Install rubber washer (4), metal washer (5) and

nut (6) onto the mounting shank. Do not overtighten.