Installation Guide

WARNING: Please carefully read and properly follow the instructions for installation found in this manual.

STEPS:

Secure the faucet assembly with the

washers (1&2) and nut (3). Hand tighten

the nut (3) onto the faucet assembly.

Lock the nut (3) into position by

tightening the screws (4) with a phillips

screwdriver.

Before installation, align the hole in the

gasket (1) and deck plate (2) with the

mounting hole in the sink. Place the

faucet assembly through the deck plate

(2) and mounting hole in the sink until

the faucet assembly sets on top of

deck plate (2).

NOTE: If the sink is uneven, use

silicone under the gasket (1).