Installation Sheet

What is not covered:
1. Damage caused by accident, negligence, misuse, abuse, improper
installation or operation or failure to follow care or installation instructions
enclosed with your product.
2. Damage occurring during shipment of the product (claims must be
presented to the carrier).
3. Normal wear and tear.
4. Labor charges, costs of removal and reinstallation, and any damages
to other property.
5. All industrial, commercial and business use whose purchasers are hereby
extended a limited lifetime on mechanical parts and 5 years on finish.
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER
WARRANTIES, EXPRESSED IMPLIED, ARISING BY LAW OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS LIMITED WARRANTY MAY NOT BE
ALTERED, VARIED, OR EXTENDED, EXCEPT BY A WRITTEN
INSTRUMENT EXECUTED BY ELKAY. THE REMEDY OF REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY
IS EXCLUSIVE. IN NO EVENT SHALL THE MANUFACTURER BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO
ANY PERSON, WHETHER OR NOT OCCASIONED BY NEGLIGENCE
OF ELKAY, INCLUDING WITHOUT LIMITATION DAMAGES FOR
LOSS OF USE, COSTS PROPERTY DAMAGE OR OTHER
MONETARY LOSS.
What you must do to obtain warranty service:
6245 Shiloh Rd, Suite B, Alpharetta, GA 30005 or call 866-237-3907 .
Please provide date of purchase and installation, description of nature
of the defect, and model number ordescription of model and/or component part.
FOR CARE AND MAINTENANCE:
·The water in certain areas of the world can be very caustic -
standing water around the product can cause damage. Be
sure to remove standing water with a dry, soft cloth as soon
as possible.
·For polished brass finishes, as often as once a week, you
can apply a paste wax or special, non-abrasive, brass
coating (DO NOT APPLY POLISH).
·Before applying a protective coating, gently brush the entire
fixture using a soft tooth brush. This will remove any dirt or
deposit build-up.
·These simple steps will add temporary protective coating to
your faucet and extend the life of the finish.
Failure to follow care and cleaning will void your warranty.
For additional information, please visit elkayusa.com .
CARE AND CLEANING INSTRUCTIONS
Shut off water supply.Remove handle(refer to step
1).Loosen bonnet (1) and cap (2) by turning it
counter-clockwise and lift out the cartridge (3).Inspect
the rubber valve seat (4) inside body (5).Tightly
bonnet (1) and cap (2).Reinstall the handle.
Congratulations on your purchase of an Elkay product.
Although your product is extremely durable, attention should
be given to the care, cleaning and maintenance of this
product. Cleaning agents and abrasives may cause damage,
which may result in oxidation and discoloration.
By following these simple guidelines for proper care and
cleaning, it will give you years of enjoyment:
TO CLEAN: Simply wipe gently with a damp cloth and blot dry
with a soft towel. A common rule of thumb is: when you dry off,
dry off your product.
· Avoid build-up of soap, toothpaste or mineral deposits, as
these tend to have an adverse effect on the appearance of
the product.
· NEVER use cleaning products of any kind on this product -
especially those containing ammonia, bleach or alcohol - or
those with any form of abrasive.
Turn off water before proceeding! Remove index(1).
With valves in "closed" position,unscrew fastener (2)
and remove handle (3) from valve stem (4).
1
4
2
3
Elkay
elkayusa.com
3
5
4
Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply. This warranty
gives you specific legal rights and you may also have other rights which
vary from state to state.
This warranty covers product installed in the United States and Canada
©2010 Elkay
Model # LK2478CR (Rev. date: 10/2010)
REPLACEMENT PARTS
RP36048* Spray
RP60032 O-ring
RP64070 Washer
RP56002 Coupling Nut
RP70037 Diverter
RP50036 Mounting Nut
RP50040 Thread Rod
RP30021* Areator
RP22008 Seat&Spring
RP22007 Cartridge
RP80108* Cap
RP70108 Cam washer
RP70107 Cam
RP70138 Bonnet
RP13163* Handle
RP10042 Index
RP50054 Set Screw
Elkay warrants that all parts and finishes of the Elkay Residential brand
faucets are free from defects in materials and workmanship for the life of
the product, if purchased after 1996. This warranty extends to the
original consumer purchaser of the product only.
If the product should leak or drip during normal use, Elkay will provide,
free of charge, a replacement cartridge. For other defects in material or
workmanship, Elkay will, at its option, supply replacement parts (or if no
longer available a comparable product). Elkay reserves the right to
examine product in question and its installation prior to replacement.
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
Shut off water supply at angle stop.
Remove old faucet. Clean sink
surface in preparation for new
faucet.
Install faucet into sink by leading all
hoses down center through center
hole. From underside, slide channel
washer onto threaded rods. Secure
with nuts.
CARTRIDGE REPLACEMENT
SAVE FOR CONSUMER
ScrewdriverGroove joint pliers
(2) 1/2 in Supply Lines
Wrench
1
2
Sealant Tape
Plumber's Putty
INSTALLATION / OWNER'S MANUAL
Single Handle Kitchen Faucet With Spray
STEPS:
Model # LK2478CR
WARRANTY
ELKAY LIMITED LIFETIME WARRANTY
Make connections to water lines.
Use 1/2" I.P.S. faucet connections (1)
or use supplied coupling nuts (3)
with 3/8" O.D.ball-nose riser(2).
Use wrenches to tighten connections.
Do not overtighten.
(A)
(B)
1
Important: After installation is
completed, remove aerator. Turn on
water supply and allow both hot and
cold water to run for at least one
minute each. While water is running,
check for leaks. Replace aerator.
3
2
For models with spray ( fits 4 - hole
sinks ):Insert spray support through
far right - hand hole on sink. Screw
hold - down nut onto shank and hand
tighten.
For models with spray
Insert spray hose down through
support and sink. Attach spray hose
to spray hose nipple. Tighten with
wrench.

Summary of content (1 pages)