Installation Instructions

Insert faucet body through the hole in escutcheon.
From underneath sink, hand tighten mounting nuts (1).
Install plastic washer (2) and metal washer (3) onto the
threaded mounting shank. Thread nut (4) onto mounting
shank. Do not overtighten.
Insert faucet body through the hole in sink.
Install plastic washer (1) and metal washer (2) onto the
threaded mounting shank. Thread nut (3) onto mounting
shank. Do not overtighten.
Before installation, screw bolts to the large escutcheon.
Insert escutcheon assembly through the gasket and the
holes of the sink.
Shut off water supplies.
Before installation, remove quick connect assembly (1)
from the free end of hose.
If installing the faucet with the escutcheon, begin with step
2A. If installing the faucet with flange, begin with step 3.
STEPS:
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
1
3-Ø 1 3/8" (Ø35mm)
2
3
4
1
2
3
1
Ø 1 3/8" (Ø35mm)