User Manual
PAGE 41000003939 (Rev. C - 09/17)
4405FR_FTN_A LK4405FR_FTN_A
FINISHED FLOOR
27 1/8"
689 mm
ADA
REQUIRMENT
33 7/16"
850 mm
34 13/16"
884 mm
10"
254 mm
O
2 7/8"
73 mm
1/8"
3 mm
19 1/8"
486 mm
8"
203 mm
12"
305 mm
MAX. WALL
THICKNESS
3 5/8"
92 mm
13 7/16"
341 mm
14 7/16"
367 mm
17 15/16"
455 mm
28 7/8"
733 mm
2 5/8"
67 mm
FIG. 2
4405 FREEZE RESISTANT FOUNTAIN
ROUGH-IN DRAWINGS
1. Wall should already be framed for the fountain using dimensions shown in Fig. 1. Shown dimensions pertain to installation location.
These dimensions are required for compliance with ANSI Standard A117.1. and ADA (Framing shown for reference only).
2. Remove bottom cover from fountain and save screws.
3. Install the fountain using 3/8" fasteners. (Fasteners not provided). Tighten securely.
4. Attach drain tube to fountain and cut to required length using the freeze resistant box as a guide.
5. Install freeze-resistant box - see box instructions.
6. Replace bottom cover.