Specification Sheet

GENERAL
Pedestal steel bottle filler with textured power coat finish and
E-Coat immersion for year-round beauty with minimum main-
tenance. The E-Coat immersion process coats the outside
and inside of the unit for the ultimate in corrosion protection.
NO LEAD DESIGN
CONSTRUCTION
Pushbutton Actuation Mechanism: Self-closing, vandal-
resistant pushbutton does not require grasping or twisting.
Inlet Strainer: Easily cleaned in-line strainer screen traps par-
ticles of 140 microns or larger before they enter the waterwa
y.
Access Panel: Manufactured of heavy-gauge steel with
vandal-resistant screws. Provides access for easy hook-up of
all plumbing connections.
SUGGESTED SPECIFICATIONS
Shipping Weight: 190-240 lbs.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Bi-Level Outdoor Tubular
Bottle Filling Station
Model LK4420BF
S P E C I F I C AT I O N S
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(9/11) 19-28
elkayusa.com
Model LK4420BF2 Shown
This model is ADA compliant when properly installed.
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61-ANNEX G, AB 1953.
Elkay
Bottle Filler: Heavy-duty steel construction with rounded design.
Laminar flow minimizes splash and allows easy maintenance.
Quick fill rate at 1 gallon per minute.
This model complies with the lead-free definition in the Safe
Drinking Water Act of 1986 and Lead Contamination Act of 1988.
Designed to be easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for installation in
public areas. Model meets state and federal requirements as
defined by the Americans with Disabilities Act.
Unit shall be of tubular steel construction. Bottle Filler unit shall
include laminar flow and front pushbutton activation. Stainless
steel contoured basin with vandal-resistant one-piece bubbler, if
applicable. Shall comply with ADA guidelines and be certified to
lead-free compliance including NSF/ANSI 61, CA 1953 and the
Safe Drinking Water Act.
AVAILABLE OPTIONS
Freeze-resistant option - add “FRK” suffix to model number.
(See separate specification sheet.)
Configuration options:
- Single bottle filler in upper location with drinking fountain basin
at lower position (Model LK4420BF1U)
- Single bottle filler in lower location with drinking fountain basin
at upper position (Model LK4420BF1L)
- Dual bottle fillers (Model LK4420BF2)