Specification Sheet

GENERAL
Pedestal fountain and bottle ller with textured powder coat nish and
E-Coat immersion for year-round beauty with minimum maintenance.
The E-Coat immersion process coats the outside and inside of the
unit for the ultimate in corrosion protection. Contour-formed stainless steel
basin on the fountain, with rounded corners and edges reducing splatter,
insuring proper drainage and prevents standing waste water.
Configuration options:
Single bottle filler in upper location with drinking fountain
basin at lower position (Model LK4420BF1UFRK)
Single bottle filler in lower location with drinking fountain
basin at upper position (Model LK4420BF1LFRK)
Dual bottle fillers (Model LK4420BF2FRK)
NO LEAD DESIGN
This fountain is certied by WQA to lead-free compliance including
NSF/ANSI 61 and 372. This model complies with the lead-free
definition in the Safe Drinking Water Act of 1986 and Lead Contamination
Act of 1988.
CONSTRUCTION
Bottle Filler: Heavy-duty steel construction with rounded design. Laminar
ow minimizes splash and allows easy maintenance. Quick ll rate at
1 gallon per minute.
Bubbler (Fountain): Vandal-resistant bubbler is one piece, heavy-duty
with integral hood guard designed to prevent contamination from other
users, airborne deposits and tampering.
Freeze-Resistant Valve System: Designed for ground installation 18”
below the frost line. 60” of access tubing provided. The length of tubing
can be adjusted in the eld for lesser frost depths.
Pushbutton Actuation Mechanism: Self-closing, vandal-resistant
pushbuttons do not require grasping or twisting.
Access Panel: Manufactured of heavy-gauge steel with vandal-resistant
screws. Provides access for easy hook-up of all plumbing connections.
This model is ADA compliant when properly installed.
Designed to be easily accessible to both physically challenged and
able-bodied individuals. Ideally suited for installation in public areas.
Model meets state and federal requirements as dened by the Americans
with Disabilities Act.
SUGGESTED SPECIFICATIONS
Unit shall be of tubular steel construction. Bottle Filler unit shall include
laminar ow and front pushbutton activation. Fountain shall include
stainless steel contoured basin with vandal-resistant one-piece bubbler.
Powder-coated nish. Shall include freeze-resistant valve system. Shall
comply with ADA guidelines and be certied to lead-free compliance
including NSF/ANSI 61 and 372 and the Safe Drinking Water Act.
Shipping Weight: 224 - 274 lbs.
SPECIFICATIONS
Bi-Level Outdoor Tubular
Freeze-Resistant Fountain and
Bottle Filling Station
Model LK4420BF-FRK
This specication describes an Elkay product with design, quality and functional benets to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
specication without notice.
MODEL LK4420BF1UFRK
MODEL LK4420BF2FRK
MODEL LK4420BF1LFRK
© 2014 Elkay
SPEC19-34 (11/2014)
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com