Installation Sheet

97629C REV. B (06/16)
FASTEN (4) SCREWS INTO HOLES AS SHOWN.
USE COVER PLATE TO GAUGE DEPTH.
ALIGN SLOTS ON APRON TO SCREW HEADS.
PUSH APRON ONTO SCREW HEADS. IF
APRON DOES NOT SNAP INTO PLACE
REMOVE BOTTOM COVER, SEE STEP 3.
PUSHING BACK CORNERS OF APRON OUT
TO CLEAR SNAPS IN REAR WILL EASE
INSTALLATION.
TO REMOVE:
REMOVE BOTTOM COVER, PUSH REAR CORNERS
OUT AND PULL FORWARD.
CANE APRON INSTALLATION
STEP 1
STEP 2
STEP 3
STEP 4
ATTACH BOTTOM COVER TO APRON WITH
(6) SCREWS AND CLIPS PROVIDED.
For purchasing Replacement Parts, please contact us at #800.834.4816
For Technical Questions, please contact us at #800.476.4106
www.elkay.com
www.halseytaylor.com
For use on EZ/LZ Light Gray and Stainless Steel style models
and HTVZ Platinum Vinyl and Stainless Steel style models