Specification Sheet

Cutout in
No. of
Countertop
1
1
/2" Dia.
U-Channel Quick-Clip
®
Inside Inside (1
1
/2" Radius
Faucet Minimum Ship.
Model Model
Overall Left Bowl Right Bowl Corners)
Holes Cabinet Wt.
Number Number L W L W D L W D L W 4" Center Size Lbs.
LR250 LRQ250 33 22 14 18 7
7
/8 13
1
/2 16 7
7
/8 32
3
/8 21
3
/8 1, 2, S2, 3 or 4 36 21
LRAD250 LRADQ250 33 22 14 18 ** 13
1
/2 16 ** 32
3
/8 21
3
/8 1, 2, S2, 3 or 4 36 21
GENERAL
Highest quality sink bowls seamlessly formed of #18 gauge,
type 304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
LR(Q) Bowl Depth: 7-7/8".
LRAD(Q) Bowl Depth: 5-1/2", 6" or 6-1/2".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation. LR(Q)250 underside is fully protected by heavy
duty Sound Guard
®
undercoating.
OTHER
LR(Q)250 and LRAD(Q)250 drain openings are 3-1/2" and
located as illustrated. Note LRAD(Q)250 small bowl drain is
located centered left-to-right and off-center front-to-back as
illustrated.
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1611, LKRB1614 or LKERBSS.
Bottom Grids: LKBG1613 [LR(Q)250], LKOBG1613 [LRAD(Q)250].
Cutting Boards: CB1613, CB1713, CBR1316, CBR1418, CBS1316
or CBS1418.
These sinks comply with ANSI Standard A112.19.3M.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2004 Elkay
(Rev. 6/04) 1-59G
www.elkayusa.com
Model LRQ2504
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
**Available in 5-1/2", 6" and 6-1/2" depths. Please consult your sales representative for other depths or modifications.
Lustertone
®
Double Bowl Sinks
Models LR250 and LRQ250
Models LRAD250 and LRADQ250 – A.D.A. Compliant
®
SPECIFICATIONS
Quick-Clip
®
Mounting System
U-Channel Type Mounting System