Dimensions Guide

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
LR Bowl Depths: 7-7/8” (200mm) (LR(Q)321) or 7-5/8”
(194mm) (all others).
LRAD Bowl Depths: 4” (102mm), 4-1/2” (114mm), 5” (127mm),
5-1/2” (140mm), 6” (152mm) or 6-1/2” (165mm).
Coved Corners: 1-3/4” (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16” (5mm) below outside
edge of sink.
Finish: Exposed surfaces are hand polished to a Lustrous
Highlighted Satin Finish.
Underside: Fully undercoated to dampen sound and reduce
condensation. LR(Q)3321 is fully protected by heavy duty
Sound Guard
®
undercoating.
OTHER
LR Series Drain Openings: 3-1/2” (89mm) and centered in
bowls as illustrated.
LRAD(Q)2918 Drain Openings: 3-1/2” and centered in
the bowls.
LRAD(Q)2922, LRAD(Q)3319, LRAD(Q)3321 and LRAD(Q)3722
Drain Openings: 3-1/2” (89mm) and located centered left-to-
right and off-center front-to-back in each bowl as illustrated.
Model LR(Q)33214
Gourmet Double Bowl Sinks
Models LR and LRQSeries
Models LRAD and LRADQ – A.D.A. Compliant Series
®
SPECIFICATIONS
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
Hole Drilling Configurations
1-1/4
" (32mm) Diameter Faucet Holes on 4 " (102mm) Centers
1
2
3
4
5
MR2
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-62K
elkay.com
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4