Dimensions Guide

ManualsBrandsElkay ManualsKitchen SinksGourmet 33-in x 22-in Lustertone Double-Basin Drop-in 5-Hole Residential Kitchen Sink

GENERAL

Highest quality sink formed of #18 (1.2mm) gauge, type 304

(18-8) nickel bearing stainless steel. Top Mount.

DESIGN FEATURES

LR(Q) Bowl Depth: 8-1/8" (206mm).

LRAD(Q) Bowl Depth: 4" (102mm), 4-1/2" (114mm), 5" (127mm),

5-1/2" (140mm), 6" (152mm), or 6-1/2" (165mm).

Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.

Bowl Recess: 3/8" (10mm) drop ledge with a raised faucet deck.

Finish: Exposed surfaces are hand blended to a lustrous

highlighted satin finish.

Underside: LR(Q)3322 is fully protected by Sound Guard

undercoating to dampen sound and prevent condensation.

LRAD(Q)3322 is fully undercoated to dampen sound and

reduce condensation.

OTHER

LR(Q)3322 Drain Openings: 3-1/2" (89mm) and centered in

bowls as illustrated.

LRAD(Q)3322 Drain Openings: 3-1/2" (89mm) and located cen-

tered left-to-right and off-center front-to-back as illustrated.

NOTE: Unless otherwise specified, sink is furnished with 4

faucet holes as shown.

OPTIONAL ACCESSORIES

Rinsing Baskets: LKWRB1316SS or LKWERBSS.

Utensil Caddy for Rinsing Basket: LKWUCSS.

Bottom Grids: LKWBG1316SS for LR(Q)3322, LKWOBG1316SS for

LRAD(Q)3322.

Cutting Boards: CB1613, CB1713, CBR1316, or CBS1316.

Model LR(Q)33224

Lustertone

Double Bowl Sink

Models LR3322, LRQ3322 and LRAD3322,

LRADQ3322 - A.D.A. Compliant Sinks

SPECIFICATIONS

Quick-Clip

Mounting System

U-Channel Type Mounting System

SEE OTHER SIDE FOR PRODUCT DIMENSIONS.

Sinks are listed by IAPMO as meeting the applicable

requirements of the Uniform Plumbing Code , International

Plumbing Code , and National Plumbing Code of Canada.

Sink complies with ASME A112.19.3/ CSA B45.4

The LRAD3322 and LRADQ3322 model sinks are compliant to ADA

and ANSI/ICC A117.1 accessibility requirements when installed

according to the requirements outlined in these standards.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice. Please visit elkay.com for the most current version of Elkay

product specification sheets.

This specification describes an Elkay product with design, quality, and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are

not overlooked.

Elkay

2222 Camden Court

Oak Brook, IL 60523

(Rev. 10/14)

1-160

elkay.com

Summary of content (2 pages)

PAGE 1
Lustertone® Double Bowl Sink Models LR3322, LRQ3322 and LRAD3322, LRADQ3322 - A.D.A. Compliant Sinks ® SPECIFICATIONS GENERAL Highest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top Mount. DESIGN FEATURES LR(Q) Bowl Depth: 8-1/8" (206mm). LRAD(Q) Bowl Depth: 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm), or 6-1/2" (165mm). Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
PAGE 2
Lustertone® Double Bowl Sink Models LR3322, LRQ3322 and LRAD3322, LRADQ3322 - A.D.A. Compliant Sinks ® SPECIFICATIONS SINK DIMENSIONS* U-Channel Model Number Quick-Clip Model Number ® Overall L W L Inside Bowl W Cutout in Countertop (1 1/ 2" [38mm] Radius Corners) L W D No. of 11/ 2" (38mm) Dia.