Spec Sheet

LR3322PD
GENERAL
Highest quality sink formed of #18 gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Top mount.
DESIGN FEATURES
Bowl Depths: 8-1/8" (206mm), Overall depth: 9-5/8 (244mm)
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Rim Height: 3/8" (10mm)
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 7/11) 1-416
www.elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
®
SPECIFICAT I O N S
OPTIONAL ACCESSORIES
Cutting Board: CB1613, CB1713, CBR1316, CBS1316
Rinsing Basket: LKWRB1316SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Bottom Grid: LKWBG1316SS
*Length is left to right. Width is front to back.
SINK DIMENSIONS*
Cutout in
No. of 1
1
/2"
Countertop
(38mm) Dia.
(1
1
/2" [38mm]
Faucet Holes Minimum
Model
Overall Inside Bowl
Radius Corners)
4" (102mm) Cabinet
Number L W L W D L W Center Size
33 22 13-1/2 32
3
/8 21
3
/8 1, 2, MR2, 3, 4 or 5 36
(838mm) (559mm)
D
9-5/8
(244mm) (343mm)
16
(406mm)
8-1/8
(206mm)
(822mm) (543mm) (914mm)
SINKS ARE
MADE IN THE USA
Installation Profile
Sink
Screw
Countertop
Clip
Silicone Caulk
(Not Furnished)
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
Finish: Exposed surfaces are hand polished to a Lustrous
Highlighted Satin finish.
Gourmet Sink
Models LR3322PD
with Perfect Drain
TM
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)