Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
LR(Q)2522 Bowl Depth: 8-1/8" (203mm).
LRAD(Q)2522 Bowl Depth: 4" (102mm), 4-1/2" (114mm),
5" (127mm), 5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm).
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 05/10) 1-61J
elkayusa.com
Model LR(Q)25224
Gourmet Single Bowl Sink
Models LR2522, LRQ2522
LRAD2522, LRADQ2522 - A.D.A. Compliant
®
SPECIFICATIONS
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
-
4
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Raised Rim: 3/8" (10mm) drop ledge with a raised faucet deck.
Underside: LR(Q)2522 is fully protected by heavy duty Sound
Guard
®
undercoating to dampen sound and reduce condensa-
tidon. LRAD(Q)2522 is fully undercoated to dampen sound and
reduce condensation.
OTHER
LR(Q)2522 Drain Opening: 3-1/2" (89mm) and centered in bowl
as illustrated.
LRAD(Q)2522 Drain Opening: 3-1/2" (89mm) and located cen
tered left-to-right and off-center front-to-back as illustrated.
NOTE: Unless otherwise specified sink is furnished with
faucet holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB2115SS, LKWERBSS
Bottom Grids: LKWBG2115SS (LR(Q)2522), LKWOBG2115SS
(LRAD(Q)2522)
Cutting Boards: CB1516
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08
SINKS ARE
MADE IN THE USA
Finish: Exposed surfaces are hand polished to a Lustrous
Highlighted Satin finish.
Utensil Caddy for Rinsing Basket: LKWUCSS
Drain: LK99
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
1 2
MR2 3
4 5
Hole Drilling Configurations
1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center
4"
4" 4"
4"
4"
4" 4"
4" 4" 4"
4"