Manualshelf

Spec Sheet

ManualsBrandsElkay ManualsSinks29 Inch Drop In Double Bowl Stainless Steel Sink with 18-Gauge, 4 Inch Bowl Depth, ADA Compliant, Sound Dampening and U-Channel Type Mounting System: 1 Faucet Hole
12
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
LR Bowl Depths: 7-7/8" (200mm) (LR(Q)3321) or 7-5/8"
(194mm) (all others).
LRAD Bowl Depths: 4" (102mm), 4-1/2" (114mm), 5" (127mm),
5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" (5mm) below outside
edge of sink.
Finish: Exposed surfaces are hand polished to a lustrous
highlighted s
atin finish.
Underside: Fully undercoated to dampen sound and reduce
condensation. LR(Q)3321 is fully
protected by heavy duty
Sound Guard
®
undercoating.
OTHER
LR Series Drain Openings: 3-1/2" (89mm) and centered in
bowls as illustrated.
LRAD(Q)2918 Drain Openings: 3-1/2" (89mm) and centered in
the bowls.
LRAD(Q)2922, LRAD(Q)3319, LRAD(Q)3321 and LRAD(Q)3722
Drain Openings: 3-1/2" (89mm) and located centered left-to-
right and off-center front-to-back in each bowl as illustrated.
NOTE: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Elk ay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2009 Elkay
(Rev. 12/09) 1-62J
elkayusa.com
Model LR(Q)33214
Gourmet
®
Double Bowl Sinks
Models LR and LRQ Series
Models LRAD and LRADQ – A.D.A. Compliant Series
®
SPECIFICATIONS
HOLE DRILLING
CONFIGURATIONS
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
1
2
MR2
3
4
5
In keeping with our policy of cont inuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specif ication sheets.
This specification describes an Elkay product with design, quality and func tional benefits to the
user. When making a c omparison of other producers’ offerings, be certain these features are not
overlooked.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08

Summary of content (2 pages)