Specification Sheet

GENERAL
Single station barrier-free stainless steel water cooler has
recessed in-the-wall refrigeration system and stainless steel
grill. Stainless tubular steel support arm incorporates unique
recess to be integrated with basin. All stainless steel polished
to lustrous satin finish with high shined outer edge.
Fountain has contoured basin to minimize splashing. Flexi-
Guard
®
safety bubbler and easy to operate, fully functional
vandal-resistant front push button. Flow regulator provides
constant stream from 20 to 105 psi water pressure.
THIS WATER COOLER COMPLIES WITH THE REQUIRE-
MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT)
WHEN PROPERLY INSTALLED.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF
198
8.
Elka
y Water Coolers are manufactured with a waterway sys-
tem utilizing copper components and completely lead-free
material. These waterways have no lead because all lead
materials, such as leaded brass, have been removed. All
joints are brazed using silver solder only. No lead solder is
permitted. A strainer with an easily cleanable screen is pro-
vided to allow trapping and convenient removal of waterborne
particulate of 140 microns and larger prior to their entry into
the water cooler.
WATERSENTRY
®
FILTER SYSTEM
Elkay Water Coolers equipped with the WaterSentry VII Filter
System. Tested to NSF/ANSI Standard 53 yields a reduction
of soluble and insoluble lead content to less than 0.015mg/l.
This translates to lead reduction levels of 93% to 99%. Class
1 particulate reduction as tested per NSF/ANSI 42. Removes
ove
r 97.5% of free available chlorine which provides Class 1
performance as tested to NSF/ANSI 42. Provides taste and
odor improvement.
Temperature Control: Enclosed adjustable thermostat is fac-
t
ory preset. Requires no adjustment other than for altitude
requirements.
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
performance.
CONSTRUCTION
Fountain Body: #18 gauge, type 304 nickel bearing stainless
steel basin polished to a lustrous satin finish with high shined
outer edge. Contoured basin offers large strike area to mini-
miz
e splashing. #16 gauge, type 304 tubular support arm
incorporates unique recess to accept basins. Fully functional
vandal-resistant push button is easy to operate.
Exclusive Flexi-Guard
®
Safety Bubbler: Innovative design
utilizes an infused anti-microbial pliable polyester elastomer
to prevent accidental mouth injuries. Flexes on impact,
then returns to original position. Strong. Abrasion-resistant.
Anti-sweat. Keyed in location to prevent rotation.
Front Panel Grill: Made of type 304 stainless steel, polished
to a uniform Elkay satin finish. Removable louvered ventilat-
ing grill encloses refrigeration unit and plumbing.
Wall Mounting Frame: MF100 frame furnished with each
unit. Frame allows flush mounting to finished wall.
Protected by Elkay’s 5 Year Limited Warranty on
the refrig-
eration system of the unit.
Elkay Pressure-Type Water Coolers are designed to operate
on 20 psi to 105 psi supply line pressure. If inlet pressure is
above 105 psi, a pressure regulator must be installed in the
supply line. Any damage caused by reason of connecting this
product to supply line pressures lower than 20 psi or higher
than 105 psi is not covered by the warranty.
STANDARDS
Model LRPB(M)8K
No Lead SwirlFlo
®
with WaterSentry
®
VII Filter System
Barrier-Free Access
Model LRPB(M)8K
®
SPECIFICATIONS
CAPACITIES CHART
*GPH of 50°F Drinking Water
Full Glass Ship.
Model Base
Room Temperature °F
Rated Load Filler Pre- Wt.
Number Rate 70°F 80°F 90°F Watts Amps Option Cooler Lbs.
LRPB(M)8K 7.5 8.6 8.1 7.5 370 4.0 No No 93
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2015 Elkay
(Rev. 12/1
5) 12-45E
elkay.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Elkay Electric Air Cooled Water Coolers are listed
by Underwriters Laboratories Inc. and comply with
both Canadian and U.S. requirements.
These units comply with A.R.I. Standard 1010.
This cooler is certified by WQA to lead-free compliance including
NSF/ANSI 61 and 372.
Model LRPB8K is designed for applications with the early
installation of the mounting frame, pre-ordered as MF100.
The fountain and water chiller are included with LRPB8K.
**Based on 80°F inlet water temperature.
Rated watts shown are based on operational (run) time, in compliance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
115V, 60 Hz or 230V, 50 Hz (International Model) single phase.
Sealed-in lifetime oil supply.
Condenser: Fan cooled. Fan motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Continuous copper
tubing which is fully insulated with EPS foam that meets UL
requirements for self-extinguising material.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.