Dimensions Guide

Model LR(Q)22193
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
LR(Q) Bowl Depth: 8” (203mm) (LR[Q]2521), 7-1/2” (191mm)
(LR[Q]1919), 7-5/8: (194mm) (all others).
Coved Corners: 1-3/4” (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16” (5mm) below outside edge
of sink.
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted
Satin Finish.
Underside: Fully undercooated to dampen sound and pre-
vent condensation. LR(Q)2521 is fully protected by heavy duty
Sound Guard
®
undercoating.
OTHER
Drain Opening: 3-1/2” (89mm).
Gourmet
®
Single Bowl Sink
Models LR, LRQ, LRS and LRSQ Series
®
S P E C I F I C AT I O N S
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 10/14)
1-60
elkay.com
Hole Drilling Configurations
1-1/2
" (32mm) Diameter Faucet Holes on 4 " (102mm) Centers
1
2
3
4
5
MR2
OS4
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4