Operating Guide

HOLE DRILLING CONFIGURATIONS
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4
"
(102mm)
4"
(102mm)
1
2
MR2
3
4
OS4
5
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2008 Elkay
(Rev. 6/08) 1-60I
elkayusa.com
M
odel LR(Q)22193
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
LR(Q) Bowl Depth: 8" (203mm) (LR[Q]2521), 7-1/2" (191mm)
(LR[Q]1919), 7-5/8" (194mm) (all others).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" (5mm) below outside edge
of sink.
Finish: Exposed surfaces are hand blended to a lustrous satin
finish.
Underside: Fully undercoated to dampen sound and pre-
vent condensation. LR(Q)2521 is fully protected by heavy duty
Sound Guard
®
undercoating.
OTHER
Drain Opening: 3-1/2" (89mm).
NOTE: Unless otherwise specified, models with one, two, three
or OS4 faucet hole option are furnished with 3 faucet holes as
shown; models with choice of one, two, three, four or five
faucet hole option are furnished with 4 faucet holes standard.
These sinks comply with ASME A112.19.3.
Gourmet
®
Single Bowl Sink
Models LR, LRQ, LRS and LRSQ Series
®
S PECIFICAT I O N S
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.