Dimensions Guide

GENERAL
Highest quality sink formed of #18 gauge, type 304 (18-8) nickel
bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 10" (LTR542210, LTR632210), 7-1/2" (LTR4622).
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 6
faucet holes. Two faucet sets are recommended for greatest
utility.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(Rev. 8/06) 1-64D
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Lustertone
®
Triple Bowl Sink
Models LTR Series
®
SPECIFICATIONS
These sinks comply with ANSI Standard A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
3
HOLE DRILLING CONFIGURATIONS
4" 4"
4" 4" 4"
4
6
4" 4"4" 4"
8
4" 4" 4"4" 4" 4"
Model LTR6322106
Cutout in
No. of
Countertop
1
1
/2" Dia.
Overall Inside Each Bowl
(1
1
/2" Radius
Faucet Minimum
Model
L W L W D Corners)
Holes Cabinet
Number A B C D E L W 4" Center Size
LTR4622 46 22 13
1
/2 16 7
5
/8 45
3
/8 21
3
/8 3, 4, 6, 8 51
LTR542210 54 22 16 16 10
1
/8 53
3
/8 21
3
/8 3, 4, 6, 8 57
LTR632210 63 22 19 16 10
1
/8 62
3
/8 21
3
/8 3, 4, 6, 8 66
D
B
1-3/4" R
1-3/4" R
C C C
A
Model LTR6322106 Illustrated
E
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.