Dimensions Guide

GENERAL
Highest quality sink bowl seamlessly formed of #18 gauge, type
304 (18-8) nickel bearing stainless steel. Top Mount.
DESIGN FEATURES
Bowl Depth: 6-1/8" (156mm).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" (4mm) below outside
edge of sink.
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2" (89mm).
Suffix “L” (left) or “R” (right) denotes waste disposer opening
located in left or right rear corner of bowl.
OPTIONAL ACCESSORIES
Rinsing Basket: LKWUCSS or LKWERBSS.
Cutting Board: CBS1316.
Model LWR2522R3
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
®
SPECIFICATIONS
U-Channel Type Mounting System
Model LWR2522L3
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-65G
elkay.com
Lustertone
®
Single Bowl Sink
Models LWR2522 Series
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
Inside Bowl
Overall
Cutout in
Countertop
(1-1/2" (38mm)
Radius Coners
Minimum
Cabinet
Size
U-Channel
Model
Number
No. of 1-1/4" (32mm)
or 1-1/2" (38mm)
Dia. Faucet Holes
4" (102 mm) centers
L W L W D L W
LWR2522R
25
(635mm)
22
(559mm)
24
3
⁄8
(619mm)
21
3
⁄8
(543mm)
1, 2, MR2, 3, 4, or 5
30
(762mm)
16
(406mm)
22
(559mm)
6
1
⁄8
(156mm)
16
(406mm)
22
(559mm)
6
1
⁄8
(156mm)
LWR2522L
25
(635mm)
22
(559mm)
24
3
⁄8
(619mm)
21
3
⁄8
(543mm)
1, 2, MR2, 3, 4, or 5
30
(762mm)