Specification Sheet

ManualsBrandsElkay ManualsSinks33 Inch Top Mount Double Bowl Stainless Steel Sink with 18-Gauge, 7-5/8 Inch Large Bowl Depth, 22 Inch Length, Waste-All Cone Drain on Left Side and U-Channel Type Mounting System: 2 Holes

Model LWR(Q)3322R4

GENERAL

Highest quality sink bowl seamlessly formed of #18 gauge, type

304 (18-8) nickel bearing stainless steel. Self-rimming.

DESIGN FEATURES

Bowl Depths: 7-5/8" (large bowl), 6-1/8" (waste bowl).

Coved Corners: 1-3/4" vertical and horizontal radius.

Bowl and Faucet Deck Recess: 3/16" below outside edge of

sink.

Finish: Exposed surfaces are hand blended to a lustrous

highlighted satin finish.

Underside: Fully undercoated to dampen sound and prevent

condensation.

OTHER

Drain Opening: 3-1/2".

Suffix “L” (left) or “R” (right) denotes waste disposer opening

located in left or right bowl.

NOTE: Unless otherwise specified, sink is furnished with 4

faucet holes as shown.

These sinks comply with ANSI Standard A112.19.3M.

OPTIONAL ACCESSORIES

Rinsing Basket: LKRB1414CR, LKRB1611 or LKERBSS.

Bottom Grid: LKOBG1616.

Cutting Board: CB1713 or CBS1316.

Cutout in

No. of

Countertop

/2" Dia.

U-Channel Quick-Clip

Inside Inside (1

/2" Radius

Faucet Minimum Ship.

Model Model

Overall Left Bowl Right Bowl Corners)

Holes Cabinet Wt.

Number Number L W L W D L W D L W 4" Centers Size Lbs.

LWR3322L LWRQ3322L 33 22 11

⁄2 16 6

⁄8 16 16 7

⁄8 32

⁄8 21

⁄8 1, 2, MR2, 3, 4 or 5 36 21

LWR3322R LWRQ3322R 33 22 16 16 7

⁄8 11

⁄2 16 6

⁄8 32

⁄8 21

⁄8 1, 2, MR2, 3, 4 or 5 36 21

SINK DIMENSIONS (INCHES)*

* Length is left to right. Width is front to back.

SEE OTHER SIDE FOR PRODUCT DIMENSIONS.

Elkay

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

(Rev. 3/04)

1-66F

www.elkayusa.com

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are not

overlooked.

ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.

Lustertone

Double Bowl Waste-All

Sink

Models LWR3322 and LWRQ3322 Series

SPECIFICATIONS

Quick-Clip

Mounting System

U-Channel Type Mounting System

Model LWR(Q)3322L4

Summary of content (2 pages)

PAGE 1
® Lustertone® Double Bowl Waste-All® Sink Models LWR3322 and LWRQ3322 Series SPECIFICATIONS GENERAL Highest quality sink bowl seamlessly formed of #18 gauge, type 304 (18-8) nickel bearing stainless steel. Self-rimming. DESIGN FEATURES Bowl Depths: 7-5/8" (large bowl), 6-1/8" (waste bowl). Coved Corners: 1-3/4" vertical and horizontal radius. Bowl and Faucet Deck Recess: 3/16" below outside edge of sink. Finish: Exposed surfaces are hand blended to a lustrous highlighted satin finish.
PAGE 2
® Lustertone® Double Bowl Waste-All® Sink Models LWR3322 and LWRQ3322 Series 4" 4" SPECIFICATIONS 4" 4" 4" 4" 5" 5" 22" 22" 3-3/4" 16" 3-3/4" 1-3/4" R 1-3/4" R 11-1/2" 16" 11-1/2" 16" 1-1/4" 33" 1-1/4" 33" 6-1/8" 16" 1-3/4" R 7-5/8" 1-3/4" R 7-5/8" 2" 6-1/8" 2" Model LWR3322L4 Illustrated Model LWR3322R4 Illustrated HOLE DRILLING CONFIGURATIONS 1 4" 2 4" 4" MR2 4" 4" 3 4" 4" 4" 4 4" 4" 4" 4" 5 Elkay 1-66F (Rev. 3/04) 2222 Camden Court Oak Brook, IL 60523 www.elkayusa.