Installation

EZ8WSLSMC_1G EZ8WSSSMC_1G LZ8WSLSMC_1G LZ8WSSSMC_1G
Elkay Manufacturing Company [phone]
1000006137 (Rev. A - 03/21)
Page 14
9.7 Resetting the Bottle Count
1. Depress the program button when the display reads
RST BCNT.
2. The display will show the current value, e.g. 0033183.
3. Depress the button again to change the value to 0.
The display will show BTLCT = 0 for approximately 2
seconds and return to run mode showing 0000000 on
the display board.
Note: Once the bottle count is reset to 0, there is no way
to return to the previous count.
4. Test the bottle filler by placing a hand or a bottle in
front of the sensor and dispense product until the
bottle count changes to 1.