Installation

EZ8WSLSMC_1G EZ8WSSSMC_1G LZ8WSLSMC_1G LZ8WSSSMC_1G
[phone] Elkay Manufacturing Company
1000006137 (Rev. A - 03/21)
Page 7
Use Proper Tools
Always use proper tools which are in good
working condition during the installation of the
product. Using tools other than those listed could
adversely a󰀨ect the product and could result in
property damage.
2.4 Property Damage
Inspect Before Cutting
Make sure no electrical wiring or plumbing is
present before cutting into a wall.
3. Tools and Supplies
3.1 Tools Required
Tool Used For
Tape Measure Locating mounting brackets
Level Mounting bracket installation
Power Drill Installation of wall anchors or lag screws for
mounting plate
Adjustable Pliers Installation of P-trap
Adjustable Wrench Installation of water inlet valve
Hacksaw Trimming waste outlet pipe
Flat Blade
Screwdriver
Adjustment of pressure regulator and
coldness control valve
5/16” Nut Driver Removal of mounting bracket and front
panel
5/32 Allen Wrench Removal of bottle filler front cover
Tubing Cutters To trim excess poly tube
3.2 Installer-Supplied Parts
Description Qty.
7/16” Wall anchors or lag screws (depending on
mounting wall surface)
13
1/4” Flat w ashers 14
P-trap with 1-1/4” inlet (single units) 1
Quarter turn shut-off valve with angled 3/8” outlet
(filtered units)
1
Flexible 3/8” tubing and 3/8” tube union fittings (filtered
units)
—
1-1/4" flexible drain pipe 1