Installation

EZ8WSLSMC_1G EZ8WSSSMC_1G LZ8WSLSMC_1G LZ8WSSSMC_1G
[phone] Elkay Manufacturing Company
1000006137 (Rev. A - 03/21)
Page 9
5.
Installation of Cooler
5.1 Mounting Instructions
1. Remove the front cover by removing the two 5/16" hex
screws on the bottom side of the cooler.
2. Remove the hanger bracket.
3. Install the hanger bracket with ve screws in 7/16"
diameter mounting holes.
Note: Hanger bracket MUST be supported securely.
Add fixture support carrier if wall will not provide
adequate support.
4. Hang unit onto the hanger bracket.
5. Install the two mounting screws to attach cooler to the
wall.
6. Connect the unit water line to shut-o󰀨 valve.
Note: Shut-off valve not shown (installer supplied part).
Hanger Bracket
Front Cover