Installation

98374C (Rev. A - 08/16)

MPW201

PAGE 1

Elkay - www.elkay.com

Halsey Taylor - www.halseytaylor.com

To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE

INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION

FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES.

After installation, keep these instructions for future reference.

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON

Installer

Mounting Plate Instructions

Model MPW201

Parts List

Refer to the illustration to make sure you receive all mounting plate parts. If any parts are missing, please

contact our Customer Service at 1.800.476.4106.

PART NO. DESCRIPTION

28794C

70020C

75541C

75708C

Mounting Plate

Hex Nut 5/16-18

Flat Washer .339/.359ID

Threaded Rod 5/16-18 x 6 In.

ITEM NO. QTY.

This Mounting Plate System is designed for use with the following models:

EDFP220RC and 7120 Ftn.

PAGE 1
MPW201 Mounting Plate Instructions Model MPW201 Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, keep these instructions for future reference.
PAGE 2
MPW201 When mounting plate directly to wall studs please refer to the diagrams shown below. For electrical, waste, and water supply locations please refer to the Installation/Owners Manual for the specific unit. MTG. HOLES FOR THREADED RODS 3/8" MTG. HARDWARE (SUPPLIED BY OTHERS) MTG. PLATE FINISHED WALL FOUNTAIN 12 1/2" 318mm 16 1/2" 419mm FINISHED WALL MTG. HOLES MTG. HOLES MTG.
PAGE 3
MPW201 When using mounting plate with ML100 (Support Columns) please refer to the diagrams shown below. For electrical, waste, and water supply locations please refer to the Installation/Owners Manual for the specific unit. MTG. HOLES FOR THREADED RODS DETAIL A U-BOLTS ARE INCLUDED WITH ML100 (SUPPORT COLUMNS) SEE DETAIL A 29" 737mm FINISHED WALL MTG. HOLES 3 3/4" ** 95mm MTG. HOLES 10 3/4" 273mm MTG. HOLES 5/8" 16mm MTG.