Dimensions Guide

Cutout in
Countertop
No. of
Overall Inside Each Bow l
(1
1
/2" [38mm]
1
1
/2" (38mm) Dia. Minimum
Model Number
L W L W D Radius Corners)
Faucet Holes Cabinet
Number of Bow ls A B C D E L W 4" (102mm) Center Size
PLA191910 1 19-1/2 19 16 10-1/8 18-7/8 18-3/8 1, 2, MR2, 3, OS4 24
(495mm) (483mm) (406mm) (343mm) (257mm) (479mm) (467mm) (610mm)
PLA252212 1 25 22 21 15-3/4 12-1/8 24-3/8 21-3/8 1, 2, MR2, 3, 4, 5 30
(635mm) (559mm) (533mm) (400mm) (308mm) (619mm) (543mm) (762mm)
PLA332210 2 33 22 13-1/2 16 10-1/8 32-3/8 21-3/8 1, 2, MR2, 3, 4, 5 36
(838mm) (559mm) (343mm) (406mm) (257mm) (822mm) (543mm) (914mm)
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 316
nickel bearing stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: 10-1/8" (257mm) (PLA191910, PLA332210) or
12-1/8" (308mm) (PLA252212).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Fauce
t Deck Recess: 3/16" (5mm) below outside edge
of sink.
Finish: Exposed surfaces are hand blended to a lustrous satin
finish.
OTHER
Drain Opening: 3-1/2" (89mm).
Recommended Drain: LK335, LK372.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 08/11) 1-289B
elkayusa.com
Model PLA3322104
1-3/4"
(44mm) R
1-3/4"
(44mm) R
B
A
C
D
4"
(102mm)
E
Single Bowl Illustrated
1-3/4"
(44mm) R
1-3/4"
(44mm) R
E
Double Bowl Illustrated
D
B
CC
A
4"
(102mm)
SINK DIMENSIONS*
*Length is left to right. Width is front to back.
Pursuit
™
Laundry/ Utility Top Mount Sinks
Models PLA Series
SPECIFICATIONS
13-1/2
In keeping with our polic y of continuing product improvement, Elkay reserves the right to change
product specification s without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating