Dimensions Guide

ManualsBrandsElkay ManualsUtility SinksPLAUH281612

GENERAL

Highest quality sink formed of #18 (1.2mm) gauge, type 316

nickel bearing stainless steel. Undermount.

DESIGN FEATURES

Bowl Depth: See chart on next page.

Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.

Finish: Exposed surfaces are hand blended to a Lustrous Satin

finish.

Underside: Fully protected by heavy duty enhanced Sound

Guard

Plus undercoating to dampen sound and reduce

condensation.

OTHER

Drain Opening: 3-1/2" (89mm).

Suffix L (left) or R (right) denotes location of the small bowl.

NOTE: All Elkay undermount sinks are designed to affix to the

underside of any solid surface countertop.

Installation: See illustrated profile below.

OPTIONAL ACCESSORIES

Drains: LK335, LK372.

Mounting Clip: LKUCLIP8 (1 package required for single bowl

models, 2 packages required for double bowl models).

Model PLAUH141810

Model PLAUH2115

Model PLAUH3120L

Model PLAUH3120R

COUNTERTOP

MOUNTING

CLIP: LKUCLIP8

(NOT FURNISHED)

1/2" (13mm)

SILICONE CAULK

(NOT FURNISHED)

SINK

1-1/8"

(29mm)

FASTENER

(NOT FURNISHED)

Installation Profile

The template provided with each sink provides

the only type of installation recommended by Elkay.

Pursuit

™

Laundry/Utility Undermount Sinks

Models PLAUH Series

S P E C I F I C AT I O N S

1000001307

1000001400

1000001414

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice. Please visit elkay.com for the most current version of Elkay

product specification sheets.

This specification describes an Elkay product with design, quality, and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are

not overlooked.

Elkay

2222 Camden Court

Oak Brook, IL 60523

(Rev. 06/14)

1-291C

elkay.com

SEE NEXT PAGE FOR PRODUCT DIMENSIONS.

Sinks are listed by IAPMO as meeting the applicable

requirements of the Uniform Plumbing Code , International

Plumbing Code , and National Plumbing Code of Canada.

Sink complies with ASME A112.19.3/ CSA B45.4

SINK DIMENSIONS (INCHES)*

Length is left to right. Width is front to back.

Model

Number

Overall Inside Bowl

PLAUH141810

LAUH2115

Cutout in

Countertop

See

Template**

Template

Packed with

Every Sink

Minimum

Cabinet

Size

L W

(533mm)

L W D

(356mm)

(457mm)

⁄8

(251mm)

(686mm)

(533mm)

⁄2

(521mm)

PLAUH211510

PLAUH281612

(686mm)

(533mm)

(254mm)

(914mm)

(711mm)

(406mm)

⁄2

(292mm)

⁄4

(400mm)

⁄2

(419mm)

⁄4

(464mm)

⁄2

(597mm)

⁄4

(464mm)

⁄2

(597mm)

⁄2

(470mm)

⁄2

(775mm)

⁄2

(191mm)

⁄4

(400mm)

Summary of content (2 pages)

PAGE 1
Pursuit™ Laundry/Utility Undermount Sinks Models PLAUH Series SP E C I F I C AT I O N S GENERAL Highest quality sink formed of #18 (1.2mm) gauge, type 316 nickel bearing stainless steel. Undermount. DESIGN FEATURES Bowl Depth: See chart on next page. Coved Corners: 1-3/4" (44mm) vertical and horizontal radius. Finish: Exposed surfaces are hand blended to a Lustrous Satin finish. Underside: Fully protected by heavy duty enhanced Sound Guard ® Plus undercoating to dampen sound and reduce condensation.
PAGE 2
Pursuit™ Laundry/Utility Undermount Sinks Models PLAUH Series 5" (127mm) SP E C I F I C AT I O N S 5" (127mm) 20-1/2" (521mm) 18-1/4" (464mm) 18" (457mm) 15-3/4" (400mm) 1-3/4" (44mm) R 1-3/4" (44mm) R 21" (533mm) 23-1/2" (597mm) 14" (356mm) 16-1/2" (419mm) 1-3/4" (44mm) R 10" (254mm) 1-3/4" (44mm) R Model PLAUH141810 Illustrated 7-1/2" (191mm) Model PLAUH2115 Illustrated 5" (127mm) 5" (127mm) 18-1/4" (464mm) 18-1/2" (470mm) 15-3/4" (400mm) 16" (406mm) 1-3/4" (44mm) R 1-3/4" (44mm) R 2