Specification Sheet

Cutout in
Countertop
1
1
/4" Dia.
Inside (1
1
/2" Radius
Faucet Minimum Ship.
Model
Overall Bowl
With
Corners)
Holes Cabinet Wt.
Number L D L W D Overflow L W No. & Ctrs. Size Lbs.
PSLVR1917 19 17 16 11
1
/2 6
1
/8 Yes 18
3
/8 16
3
/8
1, 2 or 3 - 4" Ctrs.
24 9
1
/2
PSLVR1917LO 19 17 16 11
1
/2 6
1
/8 No 18
3
/8 16
3
/8
1, 2 or 3 - 4" Ctrs.
24 8
1
/4
GENERAL
Fine quality single bowl lavatory sink seamlessly formed of #20
gauge, type 304 (18-8) nickel bearing stainless steel. Self-
rimming.
DESIGN FEATURES
Bowl Depth: 6-1/8".
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are polished to a lustrous highlighted
satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 1-5/8", 2-1/4" O.D. at top of countersink.
Arranged for standard lavatory type drain.
PSLVR1917 comes complete with LKF294 overflow assembly.
PSLVR1917LO less overflow assembly. Outlet designed for
standard lavatory drain fitting and includes drain housing and
washer assembly.
Recommended Drain:
PSLVR1917 Series – LK174, LKAD174, LK175.
PSLVR1917LO Series LK174LO, LKAD174LO.
NOTE: Unless otherwise specified, sink is furnished with a CS3
faucet hole configuration.
These sinks comply with ANSI Standard A112.19.3M.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
I
A
P
M
O
U
P
C
F
O
U
N
D
E
D
1
9
2
6
Model PSLVR1917CS3
SINK DIMENSIONS (INCHES)*
*
Length is left to right. Width is front to back.
Pacemaker
®
Single Bowl Lavatory Sink
Model PSLVR1917 Series
®
SPECIFICATIONS
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2005 Elkay
(Rev. 8/05) 1-70F
www.elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
CS3 - 2" Ctrs.
CS3 - 2" Ctrs.

Summary of content (2 pages)