Installation Guide

Water Spotting
The quality of your water can affect your sink’s appear-
ance. In areas with hard water or high iron content, a
brown surface stain can form on the sink. Additionally,
in areas with a high concentration of minerals, or with
over-softened water, a white film may develop on the
sink. To combat this problem, we suggest that you
rinse your sink thoroughly and towel dr y it after each
use.
Liquid Soap
Do not allow concentrated liquid deter gent to dry on
your sink. Most brands contain chemical additives that
will affect the finish.
Chlorides
Today, chlorides are found in most all soaps, deter-
gents, bleaches and cleansers. Chlorides are especially
not friendly to the stainless steel surface. They should
not come in contact with the surface of the sink for
extended periods. When these chemicals are used in
your sink, it should be thoroughly rinsed.
Foods
Foods containing salt or ar e acidic in nature can cause
pitting and corrosion. Avoid prolonged exposure and
do not allow them to dry onto the sink surface. Rinse
your sink thoroughly and towel dry after each use.
Specialty Collection Use and Care Guide
Specialty Collection Stainless Steel Sinks
Easy Care and Cleaning Instructions
Your Specialty Collection stainless steel sink will retain
its original appearance if after each use, the sink is
rinsed thoroughly and towel dried. Never use abrasive
cleaners or steel wool.
Specialty Collection Brass and Copper Sinks
Brass and copper have distinctive material pr operties
and are typically softer than other common metals.
Brass and copper have a living finish and their surfaces
tarnish naturally. You can expect tarnish, scratches,
and dents to appear in your sink over time. These
effects will not influence your sink ’s basic function, but
will produce the unique and appealing look associated
with brass and copper products. (A Speciality
Collection sink that becomes tarnished is not defective
and should not be returned.)
Easy Care and Cleaning Instructions
After each use, rinse the sink and towel dr y it thor-
oughly . Residue left in the sink or on the surface will
cause the sink to tarnish more quickly. It is easier to
clean the sink promptly, than to remove tarnish later. To
clean your sink, use an ordinary mild detergent and soft
cloth, rinse it thoroughly with clean water, and dry it
with a soft cloth or towel. Do not use harsh alkaline-
based, ammonia-based, or harsh acidic-based
cleaning chemicals or products to clean your sink.
Abrasive cleaners and scouring pads will scratch the
surface of your sink. For added protection, coat with a
fine automotive wax.
Stains and Tarnish
Remember, brass or copper sinks do not have a
protective coating. As for any fine brass or copper fix-
tures, to remove stains and tarnish, use a good quality
brass or copper cleaner. Follow the manufacturer ’s
instructions.
Oval and round shape sinks can be installed as either
undermount or drop-in/self rim applications. For under-
mount applications, install sink following undermount
instructions. For drop-in/self rim applications, install
sink following drop-in/self rim instructions (disregard
the 1-1/2" radius corners requirement).
NOTE: The template included for universal mount sinks
is for undermount installations only. Do not use the
template for drop-in/self rim installations.
III. Universal Mount Sinks