Specification Sheet

SPECIFICATIONS
Elkay EZH2O Bottle Filling Station
& Single High Efficiency Vandal-Resistant Cooler
Non-Filtered 8 GPH Stainless
Model VRCGRN8WSK
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for
the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.
When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay REV 07182019 2222 Camden Court © 2019 Page 1
VRCGRN8WSK Oak Brook, IL 60523 VRCGRN8WSK_spec.pdf
PRODUCT SPECIFICATIONS
Elkay ezH2O® Bottle Filling Station, & Single High Efficiency Vandal-
Resistant Cooler, Non-Filtered 8 GPH Stainless. Chilling Capacity of
8.0 GPH (gallons per hour) of 50 F drinking water, based on 80 F inlet
water and 90 F ambient, per ASHRAE 18 testing. Features shall
include Hands Free, High Efficiency, Green Ticker™, Laminar Flow,
Antimicrobial, Real Drain, Vandal Resistant. Furnished with Vandal
Resistant StreamSaver ™ bubbler. Electronic Bottle Filler Sensor With
Mechanical Front Bubbler Button activation. Product shall be Wall
Mount (On Wall), for Indoor applications, serving 1 station(s). Unit shall
be certified to UL 399 and CAN/CSA C22.2 No. 120. Unit shall be lead-
free design which is certified to NSF/ANSI 61 & 372 (lead free) and
meets Federal and State low-lead requirements.
Special Features:
Hands Free, High Efficiency, Green
Ticker™, Laminar Flow, Antimicrobial,
Real Drain, Vandal Resistant
Finish:
Stainless Steel
Power:
115V/60Hz
Bubbler Style:
Vandal Resistant StreamSaver ™
Activation by:
Electronic Bottle Filler Sensor With
Mechanical Front Bubbler Button
Mounting Type:
Wall Mount (On Wall)
Chilling Option*:
8.0 GPH
Full Load Amps
5.5
Rated Watts:
260
Dimensions (L x W x H):
18-1/16" x 18-5/8" x 39-3/4"
Approx. Shipping Weight:
91 lbs.
Installation Location:
Indoor
No. of Stations Served:
1
*Based on 80° F inlet water & 90° F ambient air temp for 50° F chilled
drinking water.
Mechanically-Activated bubbler continues to supply water in
event of service disruptions.
High-performance compressor and insulation greatly reduce
energy consumption.
Green Ticker: Informs user of number of 20 oz. plastic water
bottles saved from waste.
Laminar flow provides clean fill with minimal splash.
Silver Ion Antimicrobial protection on key plastic
components to inhibit the growth of mold and mildew.
Real Drain System eliminates standing water.
COOLING SYSTEM
Compressor: Hermetically-sealed, reciprocating type,
single phase. Sealed-in lifetime lubrication.
Condenser: Fan cooled, copper tube with aluminum
fins. Fan motor is permanently lubricated.
Included with Product:
Water Cooler (VRCGRN8WS),
Bottle Filler (EZWSR)
Ships in multiple boxes.
PRODUCT COMPLIANCE
ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
GreenSpec
®
NSF/ANSI 61 & 372 (lead free)
UL 399
Complies with ADA & ICC A117.1 accessibility requirements when installed
according to the requirements outlined in these standards. Installation may
require additional components and/or construction features to be fully
compliant. Consult the local Authority Having Jurisdiction if necessary.
Installation Instructions (PDF)
5 Year Limited Warranty on the refrigeration system of the unit.
Electrical components and water system are warranted for 12 months
from date of installation. Warranty pertains to drinking water
applications only. Non-drinking water applications are not
covered under warranty.
Warranty (PDF)
OPTIONAL ACCESSORIES
EWF3000 - WaterSentry Plus Filter System Kit (Bottle Fillers)
98324C - Accessory - Cane Apron for HAC, HVR, EMABF & VRC
Models (Stainless)
PART:________________________________QTY: _____________
PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________
NOTES:_________________________________________________
APPROVAL:_____________________________________________

Summary of content (3 pages)