Specification Sheet

ManualsBrandsElkay ManualsCommercial SinksElkay Stainless Steel 23" Wheelchair Wash-Up Single Basin Bathroom Sink with Overflow and Single Faucet Hole

GENERAL

#18 gauge, type 304 (18-8), stainless steel wheelchair lavatory

with 5/32" (4mm) raised rim. Compartment has 1-3/4" (44mm)

radius vertical and horizontal coved corners. 2-1/2" (64mm)

apron front and both sides. Exposed surfaces are hand

blended to a uniform lustrous satin finish. Unexposed under-

side is fully undercoated to reduce condensation and dampen

sound. Furnished with separate wall hanger, integral

stainless steel support brackets and grid strainer with elbow

and offset tailpiece. Meets ADA requirements.

(CHECK MODEL SPECIFIED)

WCL1923OSDC

WCLWO1923OSDC (WITH CONNECTED OVERFLOW)

FOLLOWING MODELS DO NOT INCLUDE FAUCET (IN-

CLUDES DRAIN):

(CHECK MODEL SPECIFIED)

See other side for standard faucet hole drilling configurations.

WCL1923OSD

WCLWO1923OSD (WITH CONNECTED OVERFLOW)

FURNISHED COMPLETE WITH:

SUPPLY: LKD232SBH5C chrome plated restricted swing goose-

neck spout faucet with aerator and 5" wrist blade

handles.

DRAIN: LKAD174 Chrome plated perforated strainer grid

with cast brass elbow and 1-1/4" offset tailpiece.

Compliant

Model WCL1923OSDC

Model LKD232DBH5C

Model LKAD174

Wheelchair Lavatory

Wall Mounted

Models WCL1923OSDC, WCL1923OSD,

WCLWO1923OSDC and WCLWO1923OSD

SPECIFICATIONS

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice. Please visit elkay.com for the most current version of Elkay

product specification sheets.

This specification describes an Elkay product with design, quality, and functional benefits to the

user. When making a comparison of others producers offerings, be certain these featrues are

not overlooked.

Elkay

2222 Camden Court

Oak Brook, IL 60523

(Rev. 05/14)

3-21

elkay.com

These sinks are compliant to ADA and ANSI/ICC A117.1

accessibility requirements when installed according to the

requirements outlined in these standards.

SINK DIMENSIONS*

Model

Number

WCL1923OSD

WCLWO1923OSD

(483mm)

(584mm)

⁄2

(343mm)

⁄2

(343mm)

(406mm)

⁄4

(70mm)

⁄4

(70mm)

(102mm)

⁄2

(64mm)

⁄2

(64mm)

⁄8

(67mm)

⁄8

(67mm)

⁄16

(125mm)

⁄16

(125mm)

Summary of content (2 pages)

PAGE 1
Wheelchair Lavatory Wall Mounted Models WCL1923OSDC, WCL1923OSD, WCLWO1923OSDC and WCLWO1923OSD ® SPECIFICATIONS GENERAL #18 gauge, type 304 (18-8), stainless steel wheelchair lavatory with 5/32" (4mm) raised rim. Compartment has 1-3/4" (44mm) radius vertical and horizontal coved corners. 2-1/2" (64mm) apron front and both sides. Exposed surfaces are hand blended to a uniform lustrous satin finish. Unexposed underside is fully undercoated to reduce condensation and dampen sound.
PAGE 2
Wheelchair Lavatory Wall Mounted Models WCL1923OSDC, WCL1923OSD, WCLWO1923OSDC and WCLWO1923OSD TOP 1" (25mm) SEE OTHER SIDE FOR FAUCET HOLE DRILLING CONFIGURATIONS B 1-5/8" (41mm) DIA. FINISHED HOLE 1-3/4" R (44mm) 2-1/2" (64mm) E C A H I I FRONT H WALL HANGER 1/4" (6mm) 5/8" (16mm) G G 1" (24mm) 5" (127mm) 9-1/2" (241mm) D SPECIFICATIONS 4 SLOTS 1/4" (6mm)x1" (25mm) 3-1/2" (89mm) 4-1/2" (114mm) ® 5" (127mm) 1-3/4" R (44mm) F F 3/8" (10mm) DIA.