Submittal Sheet

SUBMITTAL
SHE ET
This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion
of this specification without notice and without incurring obligation to make such changes to Conbraco products
previously or subsequently sold. Please visit apolloflowcontrols.com for the most current information.
Customer Service [phone]
www.apolloflowcontrols.com
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO#:
Rep:
Wholesale Dist.:
900 Series
DESCRIPTION
The CopperLoc
®
900 Non-Removable Push Coupling With Stop features a lead-free dezincification resistant copper body, a stainless steel grab
ring, a nylon separation ring and an EPDM O-Ring. CopperLoc
®
products are manufactured utilizing proven ASTM materials and standards.
Proudly made In the USA.
FEATURES
• Sizes: 1/2”, 3/4”, 1”
• Lead free construction
• No special tools required
PERFORMANCE RATING
• Maximum Pressure: 200 psi (13.7 bar)
• Temperature Range: 32°F - 250°F, (0°C - 121°C)
APPROVALS
• cUPC
®
Compliant
• ARRA Compliant
• NSF/ANSI 372 Lead Free
• NSF/ANSI 61 Water Quality
• ASSE 1061
• IAPMO File Listings: 4951
• Guide MHKZ: No. 6 oil at 250°F
COPPERLOC Non-Removable Copper Push End
Coupling With Stop CxC (1/2” through 1”)
SS900 REV D © 01/18 Page 1 of 1
DIMENSIONS
ITEM NO.
SIZE
(IN.)
DIMENSIONS (IN.)
WT.
(LBS.)
A B C D HEIGHT WIDTH DEPTH
10170700 900 1/2 CXC 1.53 0.90 0.66 0.15 0.90 1.53 0.90 0.06
10170705 900 3/4 CXC 1.63 1.18 0.72 0.13 1.18 1.63 1.18 0.10
10170710 900 1 CXC 1.57 1.47 0.78 0.11 1.48 1.57 1.48 0.14
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average.
Complies with Federal Public Law 111-380. ANSI 3rd party approved and listed.
STANDARD MATERIALS LIST
Body
UNS C12200 Copper
Grab Ring
Stainless Steel
Support Ring
Nylon
O-Ring
EPDM
Lubrication
Silicone, ANSI/NSF-61 Listed