Technical data

10
Switching actuators
SA3-01B
1x switch contacts 16 A,
1x thermo input,
mounting into the
installation box
SA3-02B
2x changeover contacts 8 A,
1x thermo input,
mounting into the
installation box
SA3-02M
2x changeover contacts 16A,
LED indication for relay
status, manual control,
1-MODULE
SA3-04M
4x changeover contacts16 A,
LED indication for relay
status, manual control,
3-MODULE
SA3-012M
12x switch contacts 8 A,
LED indication for relay
status, manual control,
6-MODULE
SA3-06M
6x changeover contacts 8 A,
LED indication for relay
status, manual control,
3-MODULE
CU3-01M
Basic element of the system, 2x CIB BUS, 1x EBM BUS, 1x RS232, OLED display,
Ethernet 100 Mbps, 2x analog input, 4x digital inputs, 6-MODULE
PS3-100/iNELS
Power supply 100W, supply voltage 85-253 V AC/50-60 Hz,
output voltage DC/max. current: 27.6 V/3.6 A and
12.2 V/0.35 A, 6-MODULE
BPS3-01M, BPS3-02M
Used for impedance segregation of
bus from the power supply, 1-MODULE
MI3-02M, MI3-02M/iNELS2
Allows you to expand the system to two
CIB (2 x 32 units), 1-MODULE
CU3-02M
Basic element of the system, 2x CIB BUS, 1x EBM BUS, 1x RS232, RF control interface, OLED display,
Ethernet 100 Mbps, 2x analog input, 4x digital inputs, 6-MODULE
Shutter actuator Dimming actuators
JA3-02B/DC
Actuators for control and
management of blinds,
shutters, awnings, mounting
into the installation box
LBC3-02M
Control unit for electric
ballast, 2x changeover
contacts 16A, 2x analog
signal 1-10 V,LED indication
for relay status,
3-MODULE
DA3-22M
Unit for dimming ESL, LED
and RLC load, 2 x 400 VA,
2 control inputs, 1x
thermo input,
3-MODULE
Overview of system units
System units
GSM3-01M
GSM gateway for communication iNELS system with
GSM mobile phones, EBM BUS, 3-MODULE
DCDA-33M/RGB
Dimming actuator for LED
and RGB light sources
controlled by varying current.
Control interface DMX, DALI
and CIB. 3-MODULE
EMDC-64M
INELS-DALI/DMX converter
for controlling electronic
ballasts DALI and DMX
receivers. 3-MODULE