Technical data

20
3
EBM
+
EBM
-
EBM
EBM
GND
+27V
-
+
Communication interface:
GSM network ( Quad-band) :
Transmitter output power:
Number of informative SMS:
Number of stored numbers:
Transmission indication:
Supply voltage/rated current:
Suppy voltage indication:
Terminals:
Operating temperature:
Storing temperature:
Protection degree:
Overvoltage category:
Pollution degree:
Operation position :
Installation:
Design:
Dimensions:
Weight:
system bus EBM
850/900/1800/1900 MHz
2W for GSM 900, 1W for GSM 1800
max. 80 (48+32)
max. 32
red LED
27 V DC/250 mA
green LED
max. 2.5 mm
2
/1.5 mm
2
with sleeve
-20 to +55 °C
-30 to +70 °C
20 IP devices, 40 IP with cover in switchboard
II.
2
any
to DIN rail EN 60715
3-MODULE
90 x 52 x 65 mm
128 g
It serves for communication with the iNELS system via commands sent in short SMS messages
from mobile phone GSM.
Via GSM3-01M aned mobile phone, you can control the system, and the system can inform
you back by sms or ringing.
Max. capacity of GSM3-01M is 32 phone numbers, 48 outgoing and 32 incoming SMS
messages. Max. length of SMS is 20 symbols.
GSM3-01M IDM can through software-defi ned numbers to dial, ring 20 s and disconnected. It
can also perform actions on incoming calls.
GSM3-01M can also serve as a transmitter of SMS messages or in case of intrusion or alert to
a security agency.
Operating range is 850, 900 as well as 1800, 1900 MHz (quad-band).
SIM card is inserted into the unit from the front panel.
Connector Mini USB for service purposes.
GSM3-01M is connected to the central unit CU3-01M (02M) via the system bus EBM.
In case it involves the last unit on the system bus EBM, it is necessary to terminate the wire
with a resistor with rated resistance of 120Ω. This part adapted to be inserted between
terminals is included into central units packages and it is necessary to insert between
terminals EBM+ and EBM-.
The package includes is an external magnetic antenna (cable 3m, 5db gain), which is
connected to the connector RSMA (F) on the front panel.
GSM3-01M in 3-MODULE version is designed for mounting into a switchboard, on DIN rail
EN60715.
COMMUNICATION
TECHNICAL PARAMETERS
Example of connection
EAN code
GSM communicator GSM3-01M
POWER SUPPLY
CONNECTION
DIMENSIONS AND WEIGHT
OPERATING CONDITIONS
GSM3-01M 8595188132428
External antenna AN-E 859415759012